What’s Included In A Furnace Maintenance Checklist?

Regular furnace maintenance is necessary for an effectively working heating unit. It helps in managing the performance of the furnace up to the mark. Also, it helps to lower the electricity bills and save your family from dangerous conditions, such as CO leakage or sudden electric sparking. Thus make a comfortable and cozy home with the help of annual furnace maintenance in Edmonton.

Here is some information that will help you maintain your heating unit and the comfort of your home. Make a checklist and inspect the furnace without missing any single step.

The Simplest Checklist For Furnace Maintenance Includes

The process of a heating tune-up needs a customized checklist because the requirements of different HVAC units vary from each other. Thus, you should contact your HVAC contractor for furnace maintenance in Edmonton to get the best suggestions for your heating system. However, here is a primary checklist recommended by several HVAC technicians.

  1. The functional components of your furnace need to be lubricated. Lubrication reduces the friction between these parts and prevents them from wearing off.
  2. If the functional components, such as motors, bearings, and fans, are worn off, replace them.
  3. Clean and adjust the electrodes and pilot light.
  4. Inspect the burner combustion, blower motor, and gas pressure to ensure proper functioning.
  5. Clean the ducts and vents to ensure proper airflow.
  6. Check the heat exchanger for any damage, corrosion, or crack. If found, they need to be replaced immediately.
  7. Inspect all the wiring of the house to ensure proper power conduction without any risk to the home.
  8. Check carbon mono-oxide leakage with the help of a CO analyzer.
  9. Inspect the fuel of the furnace.
  10. Check the programmable thermostat and change the batteries if needed.
  11. Test the heating controls to ensure proper cycling of the system.
  12. Tighten the gas connection as required.
  13. Check the gas valves and oil pumps for correct function.
  14. Clean or change the air filter to avoid the entry of any allergen inside the house.
  15. Adjust the pressure regulator and oil nozzle.
  16. Replace oil filters regularly.
  17. Inspect the ductwork and look for any loose joint. If there is any loose connection, seal it properly.
  18. If you found any damage in the heating system that you can not fix, immediately contact a furnace installation in Edmonton and let them fix the issue.

This furnace maintenance checklist will help you inspect the heating system and prepare it for the fall season or winter. It would help to avoid panic and prepare a similar checklist every year before using the furnace after the dormant phase during summers.

Mobile Heating & A/C company is one of the best air conditioning and furnace installation companies in Edmonton. Our team works extremely hard to make your home comfortable to bear the drastic temperature changes. Our customers can call us on (780) 463-5063 in any HVAC emergency. You can also email at to book an online appointment now. Visit the official website of Mobile Heating & A/C to know the best offers of the season.

What Are Signs That Your Furnace Is Going Out?

A furnace typically lasts for 10-20 years. That’s a fact. But within the course of those 10-20 years, how to figure out how long your furnace is going to last? Your furnace might give you numerous visible signs that indicate it is slowly going out.

It is best to replace your furnace before that unless you want to pay hefty bills and suffer in the chilly cold. The tiniest of things can disturb your furnace’s efficiency, and if the same problem persists, then it leads to a reduction in your furnace’s lifespan.

But, how to detect for sure that there is something inherently wrong with your furnace? Or that your furnace is going out?

  • Flame Color: If the color of the flame is yellow instead of blue, then it is not burning properly. It can lead to harmful CO emissions, hazardous for your family’s health. So, monitor the level of CO produced by your furnace using a carbon monoxide detector.
  • Rising Utility Bills: There might be various causes behind your furnace’s utility bills being excessively high. The problem might lie in the air filter, other dirty components, and so on. However, if it is still facing an issue after a thorough clean-up, then the problem might be something bigger. So, contact a professional to help you with that as the problem has a deeper root than expected. Our furnace replacement Edmonton team is always ready to help you with that!
  • The Buildup of Moisture: If you experience certain dampness in several house rooms, then there is an issue of airflow. It might also signify problems with the vents.
  • Old Age: Furnaces do not last for more than 20 years usually. If they do, then it’s a miracle! But generally speaking, this does not happen. So, if your furnace has completed its lifespan, then it’s time to get a new one that is more efficient and comfortable for you.
  • Frequent Repairs: If you have to repeatedly call an HVAC technician to resolve problems with your furnace, then it might be something serious. Furnaces are usually set for the heating season with just maintenance and tune-up. However, if the problem persists even after that, it is better to replace it.
  • Uneven Heating in the House: Your furnace is probably struggling to produce quality hot air, which leads to the development of cold spots in your house. It cannot manage to heat your house due to failing parts or just dust and dirt. However, it also signifies that it has reached its limit. So, replace it with feeling more comfortable and at ease.
  • Strange and Loud Sounds: If you begin to hear loud and strange noises like rattling, rattling, and banging coming from your furnace, then it’s time to get it looked at by a professional. Often, these issues suggest a certain degree of danger. So, better to take precautions.

There are many other signs as well. But for the time being, these are the prominent ones. However, if you feel that your furnace is now old, you should contact an HVAC company. Our furnace repair Edmonton team is always there to help with the repairs, but even then, you should consider replacement seriously.

For more details about Mobil Heating & A/C and to get free quotes, contact us on our website or via phone on 780-463-5063!

How Often Should Your Gas Furnace Be Cleaned?

With the hustle of daily life, it’s easy to overlook the need of keeping our HVAC systems in good working order. An annual cleaning is required for your furnace to preserve its performance and lifetime. You don’t want to find yourself in a situation where you have to fix or replace your furnace.

We recommend doing it at least once a year or every six months if you use it too frequently or have pets in the house. You can clean your furnace independently or contact a professional like heat pump repair Edmonton to handle it for you.

How Often Should You Clean Your Furnace?

Experts recommend having your furnace serviced before the cold weather arrives to maintain it in good working order and stop it from breaking down when you need it most. Manufacturers recommend inspecting and servicing furnaces once a year, in the spring for AC and the fall for heating and furnaces.

Is Time Taken to Clean a Furnace?

A professional furnace cleaning takes about 1.5 to 2 hours on average. However, depending on the state of your furnace, the technician might require additional time to clean your furnace thoroughly.

The following things are included in a furnace cleaning:

  • Examining and cleaning the heat exchanger.
  • Ascertain that the natural gas pressure is set according to the manufacturer’s recommendations.
  • All safety controls should be tested and ensured to be in functioning order.
  • Inspection and replacement of air filters.

What are The Benefits of Getting a Furnace Cleaned?

  • According to some experts, lack of maintenance is to blame for up to 75% of no-heat calls in the winter. A poorly maintained furnace can abruptly stop working, leaving your family in the cold.
  • It could potentially damage your health.
  • A furnace inspection can detect a carbon monoxide leak, otherwise difficult to detect as this gas is colorless and odorless.
  • Your furnace might be red-tagged if it’s in a dangerous state, which means the furnace can’t be used until it’s fixed.
  • If you don’t maintain your furnace, whether it’s gas or electric, it will run less efficiently, work more, and cost you more money in the long run.

Is Furnace Cleaning Cost-Effective?

Furnace cleaning’s primary goal is to keep your furnace from breaking down, saving you money on repairs, parts, or, worse, a new furnace. A furnace clean also alerts the expert to any potential future problems with your furnace.

Maintaining the energy efficiency of your furnace can also be accomplished by cleaning it. Furnace cleanings not only save you money on repairs, but they can also protect you from dangerous situations. The air quality in your home might be harmed by not cleaning your furnace.

If you want to save money on furnace maintenance in Edmonton, call us at (780)-463-5063 or drop us a mail here. We at Mobil Heating and AC can help you clean your furnace correctly.

Average Cost of Installing A New Furnace

The energy efficiency and size determine the cost of installing a new furnace in BTUs of the heater, the size of your home, ductwork changes, labour, permits, and the intricacy of the installation.

Installing a furnace can cost anywhere from $600 to $3,100, depending on the system type, efficiency rating, size, model, variety, brand and task complexity.

Installers of furnaces charge between $70 and $100 per hour, and the installation takes around three to four hours. Along with that, with each technician, the charges increase.

The typical cost of installing a new furnace and ducting is $3,400 to $11,000, and the cost of replacing air ducts alone ranges from $1,400 to $5,600 on an average.

The Average Cost of Replacing a Furnace

  • Gas furnace – $2,000 to $5,200, depending on the model and size.
  • Electric furnace replacement in Edmonton – $1,900 to $5,600.
  • Oil furnace – $2,500 to $6,000, depending on the model, size, and efficiency.
  • Propane furnace – $2,200 to $5,700.
  • Geothermal heating systems – $10,000 to $35,000.
  • Coal furnace – $4,500 to $10,000.

Factors Affecting The Cost of Furnace Installation

The total cost estimate for installing a new furnace is relatively straightforward to break down into line items. You are in charge of the cost of the new furnace unit, as well as any local service charges or labour costs, as well as the disposal of your old furnace, equipment, and any applicable local permits. If your new furnace isn’t working correctly, you may need to rebuild the ducting.

  • The cost of a furnace unit will account for roughly 60% of your total installation costs.
  • Local labour charges are typically around 25% of total installation costs.
  • New costs like removing an old furnace, purchasing additional equipment, and obtaining municipal permissions account for about 15% of your total installation costs.
  • You should anticipate paying an extra $300 to $585 per duct run replaced if you also need ductwork redone.

Additional Factors to Consider Before Furnace Installation

  • Energy sources to be used
  • Furnace efficiency
  • Furnace size
  • Installation cost
  • Warranty Plans
  • Furnace brand

Points to Keep in Mind Before Furnace Installation

  • Get multiple offers from local furnace companies. Always be wary of going with the lowest bid, as you can end up with subpar service and equipment.
  • Inquire about the contractors’ equipment markup. A lower labour cost could include hidden equipment markups.
  • Have a new thermostat installed by your furnace contractor. Newer technologies necessitate the use of more recent gadgets.
  • Request a thorough estimate that includes the total cost of the furnace installation job, the manufacturers and model numbers of the equipment, and projected completion dates.
  • To avoid purchasing an undersized or oversized gas furnace, double-check their estimations.
  • Request equipment from a reputable manufacturer. Low-cost knockoffs may fail, leaving you out in the cold.

Suppose you are searching for an HVAC professional like furnace repair in Edmonton. We at Mobil Heating and AC can help you in saving money. Call us at 7804635063.

8 Causes of Furnace Short Cycling Problems

Winters can be indispensably intense, especially in cities like Edmonton. Thankfully, HVAC systems like furnaces do the job of keeping us warm. However, like all machines, a furnace can have a bad day too! One of the most common issues you might face is short cycling.

Short cycling means when your furnace turns on and off without reaching the set temperature. While in most cases you need to call furnace maintenance in Edmonton, look at these eight causes behind this issue.

8 Causes of Short Furnace Cycling

1. Overheated Unit

Your furnace’s temperature control mechanism cools down the system when the temperature exceeds a specific limit. However, if this mechanism starts to fail, your unit will overheat, causing it to shut down. Other reasons for overheating are faulty or cracked heat exchangers. In worst cases, a cracked heat exchanger can overheat the other internal components leading to short cycling.

2. Malfunctioning Pilot Sensors

As your furnace grows older, small amounts of moisture produced in the system can corrode the hardware. When this corrosion spreads across the internal elements, the furnace is most likely to cause short cycling. Thus, it’s important to ensure the safety and cleanliness of the system by scheduling regular furnace maintenance in Edmonton.

3. Oversized Unit

If the furnace is too large for your home, it will heat up quickly while distributing the heat unevenly. This excess heat is most likely to escape through holes and crevices. The furnace loses so much energy and heat that it will start short cycling to maintain a constant temperature.

Thus, it’s always best to consult a professional furnace installation in Edmonton as they suggest the right-sized unit.

4. Malfunctioning Thermostat

A malfunctioning thermostat is often a cause of short cycling. Check your thermostat to see if the temperature and mode settings are fine. There have been instances when homeowners forget to switch on the heating mode, leading to short cycling.

5. Dirty Air Filter

If your furnace’s air filters are full of gunk and debris, it will block the airflow. As the warm air cannot flow out, the furnace’s internal temperature will rise, causing it to shut down. In such cases, you can expect excess short cycling.

6. Damaged Starting Mechanism

If the starting mechanism (igniter) gets damaged, it will heat up and shut down the pilot light. In such cases, the furnace will turn off immediately to prevent gas accumulation.

7. Blocked Flue Pipes

There are many instances of small birds and rodents getting into your furnace’s flue pipes. It can lead to a blockage, and the furnace in response will shut down as a safety mechanism. This will immediately cause short cycling,

8. Poor Insulation

As soon as you go for a furnace installation in Edmonton, the first step is to check your home’s insulation. Check for open windows, cracked seals, etc. Poor insulation prevents your furnace from heating your home adequately, which in turn causes short cycling.

Has your furnace been short cycling lately? We can fix it. Speak to one of our experts today at 780-463-5063.

How Do I Know If My Furnace Is Dying?

Increased utility bills, inefficient heat, and a broken furnace in the middle of the winter season are just some of the annoying consequences of keeping an old furnace. And having a broken furnace is not an option, especially in the freezing cold of Edmonton.

A dying furnace can lead to increased costs, and it will give you a signal of its imminent death using various tell-tale signs. Old furnaces require expensive repairs to keep them going, and it is a sign to get your furnace replaced with newer models efficiently.

Here are Some Visible and Apparent Signs That Show That Your Furnace is Dying.

  • Uneven Temperatures: As your furnace begins to age, it does not produce the quality air it used to. If you notice a stark change in temperature when moving from one room to the other, there is probably an issue with the furnace. This might lead to constantly adjusting the thermostat, while there is no issue with it in reality. This needs to be checked out by HVAC technicians immediately.
  • Age of the Furnace: The average lifespan of a furnace is 15-20 years. If your furnace is approaching that phase, you need to consider replacing it as soon as possible. We know you don’t want to spend too much of your money on repairing the old furnace. So, it’s better to get it replaced and invest in a more efficient furnace.
  • Too Many Repairs: Another prominent sign of a dying furnace is that it requires a lot of repairs when it reaches the old-age phase. You might need to spend a lot of money on new components and parts that might be costly. Hence, to avoid those costs, consider replacing your furnace with a better one.
  • Unusual Sounds and Odors: If you hear unusual noises like banging or clanking coming out of your furnace, then chances are that the furnace components have an issue. It might also signify a gas issue. Similarly, if you smell strange odors coming out of the furnace, then it might be possible that there are gas issues with the furnace, et cetera. Both of these signify a dying furnace, as the components of the unit are failing.
  • Dry House: An old furnace has issues in cleaning up the air of your house. This can lead to mold and pollen allergies that can be harmful to your family. This is because old furnaces aren’t able to humidify or clean the air, rendering a feeling of staleness in the house.
  • Leaking Carbon Monoxide: If your furnace is getting old, cracks might develop in the heat exchanger, which can lead to Carbon Monoxide leaking out. Carbon Monoxide is a poisonous gas and can cause serious health problems. Some of them are headaches, burning feelings, and nausea. Get this immediately checked out by HVAC technicians, as it can be dangerous for you and your family.

Apart from these tell-tale signs, several other issues like a yellow flickering flame, a pilot light, et cetera are visible signs of an old furnace.

If you need your old furnace replaced, contact Mobil Heating & A/C, as we have the best furnace replacement Edmonton team who are experienced and skilled at what they do. If you wish to know more or connect with us, contact us on 780-463-5063.

When Your Furnace Can Trigger Your Allergies?

When the furnace is turned on, it circulates warm air throughout the home and expels all of the dust, mildew, and insect parts accumulated in the heating vents. If left untreated, this issue can cause headaches, sneezing, and coughing throughout the whole season. Timely furnace replacement and repair are a must to prevent such allergies.

How To Prevent These Allergies?

It has been noted that the indoor air quality of your house has a direct impact on your family’s health. Poor indoor air quality causes acute discomfort, long-term impacts of inhaling indoor air pollution for lengthy periods can result in persistent and chronic diseases. Living in a house with filthy air has been related to a variety of respiratory illnesses and allergies. To prevent such discomfort, do try the following methods.

1. Cleaning your ducts is a good idea
The air passing through your ducts is more likely to induce an allergic reaction if they are filthy. It would help if you had your ducts cleaned by a professional at least once every five years. If you have allergies, it’s advisable to err on the side of caution and have this service done every three years—especially if you have dogs or have had issues with mold development in your house.

2. Install a Dehumidifier in your home
Indoor humidity levels that are too high might exacerbate allergies. Mold thrives in humid environments, and dust mites love it as well. Your interior air will be considerably healthier if you add a dehumidifier to your HVAC system. As the air flows around your home, these gadgets eliminate any extra moisture. A dehumidifier may be readily integrated with almost any existing forced-air system by an HVAC professional, such as those at Mobile Heating and AC. Once installed, it will automatically turn on and operate as needed. Whole-house dehumidifiers operate silently in the background and may even help you save money on electricity by reducing the load on your air conditioner.

3. Invest in a HEPA filter
Another thing you can do to make forced air heating more allergy-friendly is to make sure you’re using the correct kind of air filter. Fiberglass filters are inexpensive and effective at keeping dust out of your furnace, but they don’t always catch tiny particles like pet hair and pollen. A HEPA filter will capture these allergens and prevent them from recirculating through your ducts. “High-efficiency particulate air,” or HEPA, is an acronym for “high-efficiency particulate air.” These filters catch 99.7% of particles with a diameter of 0.3 microns or greater. Because the federal government controls the word, you can trust that a filter labeled as a HEPA air filter will satisfy these system requirements.

Call Mobil Heating and Air Conditioning to learn more about their HVAC maintenance services and set up an appointment for installation, replacement, or furnace repair in Edmonton. This is the only method to ensure that the air quality in your house does not contribute to allergies or disease. In the Edmonton, Canada region, we provide a comprehensive variety of HVAC services. Please make an appointment with one of our professional staff members at a time suitable for you.

What are the Symptoms of a Bad Limit Switch on a Furnace?

For a place like Edmonton, furnaces and heating systems are very important. It is not easy to find good heating contractors and furnace maintenance in Edmonton. But not to worry, as we have a team of professionals that will take care of all your heating contractor needs in Edmonton.

In a furnace, when the elements are boiled, Carbon and oxygen are reacted together. It releases Carbon dioxide and heat as the reaction is exothermic- it releases toxic heat-generating particles. The Limit Switches is used because:-

  • Limit switches are used to keep toxic heat particles from spreading. The limit switch turns off the burner because if the temperature near the heat exchanger grows excessively, the heat exchanger can break, releasing hazardous combustion remnants into your house.
  • It will not enable the fan to operate until the air generated within the furnace is sufficiently heated.

Limit Switches or “high limit switch” is a machine, and there are chances of machine malfunction.

Symptoms of a Bad Limit Switch on the Furnace

Some of the symptoms from where we can check the malfunctioning are:

  • The constant operation of your furnace’s compressor seems to be the most typical symptom of a faulty limit switch. Even as the limit switch prevents the fan from turning on until the warm air reaches a particular temperature, it also prevents the fan from turning off when the air cools to a given temperature. Whenever a limit switch fails, it may not turn off at the end of a cycle, culminating in a blower that runs continuously.
  • A second typical issue with a limit switch is that it will not enable the furnace to run.

Ex:- If the airflow in your system is considerably decreased due to a blocked air filter, there will be insufficient air moving through the system, which might lead the heat exchanger to overheat. When the limit switch detects this, the burner is turned off.

  • A blower fan that does not turn off occurs when the switch merely fails to turn off the fan. After that, the burners have been turned off, and the air exchanger has cooled sufficiently.
  • Automatic Tripling of the Reset button in the machine is one more symptom for the same.

Repair and Maintenance

A faulty switch might potentially prohibit the furnace from working at all. The furnace will not run if the breaker has totally failed and is trapped in the open circuit (off) configuration. Frequent overheating can have the same result.

If your machine is not working correctly, keep a close eye on the repairs and maintenance of the Machinery. You must reset the device after a given period.

Conclusion

Furnace serves multiple purposes for homes and industry. It needs to be repaired and maintained regularly. Some symptoms show the system is not performing well. Some of the symptoms are listed above.

Do not hesitate to contact our team of experts at mobilheating.ca for smooth furnace maintenance in Edmonton. It may cost you a couple of pennies in the short term but will save money, keep you comfortable for a long time.

How To Reset the Limit Switch of my Goodman Furnace?

Winter is just around the corner, and you must be getting your furnace all set for the weather. However, suppose you are looking forward to a new installation or furnace replacement in Edmonton. In that case, it’s pretty essential to choose a high-efficiency furnace to save money in the long run.

Thankfully, Goodman furnaces come to the rescue due to their energy-efficient technology and durability. Founded in 1982, Goodman is an American company that manufactures superior heating and air conditioning equipment for residential and commercial sites.

Nevertheless, before you start using your furnace in a full-swing, you need to perform some simple steps to make it all set, such as resetting the limit switch.

What is a Limit Switch?

A limit switch is a crucial part of a furnace that is responsible for turning off/on the furnace fan depending upon the room’s temperature. It ensures the safety as well as cost-efficiency of the unit.

All Goodman residential furnaces contain limit switches to enable the safe operation of the unit while saving energy. These limit switches can be divided into the following types:

  • Primary Limit Switch: This limit switch prevents the furnace from reaching super high temperatures that can be dangerous. It is programmed to reset automatically after a malfunction.
  • Rollout Limit Switch: This limit switch is activated only when the burner flames are not adequately drawn into the heat exchanger. Unlike the primary limit switch, the rollout limit switch is reset manually. But you don’t need to be concerned at all because resetting the rollout limit switch in a Goodman furnace takes only seconds!

However, if you find any difficulty resetting the limit switch or observing any malfunction, leave it to a professional furnace repair in Edmonton.

Steps For Resetting a Goodman Furnace’s Limit Switch

Step 1

Before handling any component of a furnace, it’s essential to turn off any power supply. Locate the circuit breaker switch corresponding to the Goodman furnace and flip it to the “Off” position.

Step 2

Remove the furnace’s access panel to reach the internal components. Just hold and lift the sides of the panel straight up. This will make sure the retaining tabs at the bottom of the furnace cabinet are clear.
Please note that some Goodman furnace models might require you to remove some screws to open it. After you successfully remove the access panel, set it aside. However, if handling these components seem confusing, do not hesitate to call a professional furnace repair in Edmonton.

Step 3

Locate the rollout limit switch, which you can find on the burner assembly. It usually looks like a rounded component with a distinct red button in the centre.

Step 4

Press and hold this red “Reset” button. Just hold the button for one to two seconds before releasing it.

If you find any difficulty while resetting the Goodman furnace, do not proceed further without a professional around. At Mobil Heating & AC, we provide the best quality repairs, installation, and furnace replacement in Edmonton.

Call us at 780-463-5063 to schedule a service today!

What Are The Maintenance Services Required For An AC?

Plenty of time, your system will alert you about a problem before it fails. The air conditioner’s filters, coils, and fins must be maintained regularly for the unit to perform successfully and efficiently over the years.

Neglecting basic maintenance ensures that the air conditioning performance deterioration while energy consumption continues to rise.

You can save a lot of money and avoid the frustration of a full system breakdown if you fix the problem early with the help of ac installation in Edmonton. The following are some of the AC services to look for :

Filters for Air Conditioners

To ensure the efficiency of your air conditioner, the most important maintenance activity is the regular cleaning of the filters.

Clean filters allow normal airflow and significantly improve the efficiency of the system. This also prevents dirt from directly entering into the evaporator belt and reduces the heat-up efficiency of the spiral.

If the air conditioner is continually used or is exposed to dusty circumstances, the filters may require more attention.

  • Remove Any Debris From The Area Around The Air Conditioner

    The condenser fins are the first place to look for dust and debris that has become lodged. Examine them well and clean them with a rough paintbrush or other tools. Clean up any residual particles using a vacuum cleaner.

    Ensure that the area surrounding the condenser is free of plant growth and other obstacles to ensure that enough air reaches the outdoor unit.

    Make sure there are no items within a 2-foot radius of the unit for the best results.

     

  • Remove The Condenser Fan and Clean it

    The condenser and ventilator are placed outside your house, where many specks of dust, falling leaves, and other waste are collected.

    When the condenser is caked in dust and debris, it has difficulty dissipating hot air and heat, which causes the condenser and compressor to heat up.

  • Drain Unclogging

    The drain is likely clogged, and you’ll need to unclog it. If the drain remains clogged, the humidity inside the house rises, making the environment uncomfortable.

    All you have to do is locate the back drain and use a stick or other item to unclog it. Make sure you don’t harm any other parts of the air conditioner while doing so.

  • It is Important to Clean The Coil Fins

    The metal fins on the evaporator coils and condensers are immediately visible, and any dust or debris that has formed on them may be easily seen.

    You must clean them if this is the case. The best approach to clean the fins is to use a garden hose to spray them with water. Attach a hose nozzle to the garden hose if the hose is spraying too hard and damaging the fins.

    We can assist you in saving money and time on routine air conditioner maintenance. If you are looking for an ac repair in Edmonton, or call us at 780-463-5063 to make an appointment with one of our experts.